CHASE BAYS NEW DUAL BAFFLED POWER STEERING RESERVOIR
This is a product pre-order. These orders will ship on December 2nd 2016. Thank you so much for partaking in this new product release!
Compact & Minimal Design
6061 Aluminum Construction
Anodized Semi-Gloss Black w/ White Laser Etched Cap
DUAL Baffled for BULLETPROOF Performance
Completely Modular Design
Three bracket options to best suit your application (see descriptions below)
5" High x 3" Diameter (6" total height including cap and lower fitting)
Countless hours of research and development were put into our newest Power Steering Reservoir. This isn’t as simple as putting 2 fittings on a fluid container and calling it a day. It is far more complex. The smaller fitting on the Reservoir is the fluid return from the rack. It can be sent back at pressures exceeding 100psi. When that hits the fluid in the reservoir it can cause extreme foaming aeration if not properly slowed down and directed. We have put some serious engineering time to the internal design to negate this entirely. We can't give away all of our secrets, but just know you won't have any aeration issues. Thats just 1 of the baffles, it doesn’t end there.
Go to any road race or drift event and look at all the factory (and most aftermarket) power steering reservoir. By the end of the day there is spillover all around the reservoir. It was our goal to be the 1 in 100 reservoirs to have no spillover from turbulence or overheating. The cap and cap bung in the reservoir itself are baffled together in such a way to completely block fluid while still providing passage for an air vent Power Steering Reservoirs need.
The 2 fittings are now -6AN and -10AN Threaded Female ORB ports, so you can thread practically any size AN or Barb type fitting right in to match your setup.